新时代RM官方网站下载,rm新时代app打不开

What kind of equipment and terminals do you choose for heating in large-space industrial workshops in winter?

time：2023-11-15
hits：1234次
source：正弘奧能

Factory workshops are generally tall Spaces, and even some as high as 10 meters or more. High space industrial workshop heating is an important link in the workshop construction of a production-oriented company. The appropriate heating temperature can better ensure the working state of employees, but also better store products, industrial workshop heating choose what kind of heating equipment and end directly determines the heating effect of industrial workshop. 
 

	The traditional convection heating principle is to heat the air first, and then heat the whole room after the air is heated to the human body, while the infrared radiation heat emitted by radiation heating is to directly heat the human body or equipment, and then heat the air through secondary radiation such as the human body or equipment. Compared with the traditional convection heating method, infrared radiation heating is more energy saving, no heat loss, a heating period can save energy up to 30%-50%. Radiant heating is also safer because there is less air circulation, which means there is less blowing dust around. Therefore, radiant heating can not only save heating costs for the factory, but also maintain the safety and comfort of employees, so that they can achieve higher work efficiency in the industrial operating environment.


	 


	<img src="http://hzhonghua.com/Uploads/image/20231115/20231115170139_45584.png" alt="" /> 

 
ECOPAN hot water radiation panel promoted and sold by Beijing Leadway Power Co., Ltd. adopts innovative design concept. ECOPAN hot water radiation panel uses hot water, steam or hot oil as the thermal conductivity medium, flows in the radiation panel pipeline, transfers heat to the radiation panel, generates infrared light, and transfers heat to people and objects in tall space buildings. 
 
The ECOPAN hot water radiant panel is covered 2/3 of its surface with 1/2 "or 3/4" diameter welded or unwelded steel pipe. Special attention is paid to the expansion between the pipe and the plate, as well as technical solutions that make installation easier. As the warmest part of the panel, the pipe is completely downward, and 70% of its surface is wrapped by the metal plate (the wrapping Angle is more than 280°), which increases the heat transfer area, and perfectly ensures the transfer of heat from the tube to the plate, reducing the convective flow and increasing the radiation. 
 

	With the same dimensional characteristics (pipe diameter, number and spacing, panel width), ECOPAN hot water radiant panels have higher thermal energy efficiency than other products on the market. This makes it possible to use fewer products to meet the same heating requirements, saving on materials and installation costs.


	 


	<img src="http://hzhonghua.com/Uploads/image/20231115/20231115170203_87590.png" alt="" /> 

 
ECOPAN hot water radiant panel heating is mainly used in industrial plants, warehouses, sports venues, aircraft repair warehouses, auditoriums, schools, hospitals, natatorium, shopping malls, supermarkets and other public places with tall space, even if the insulation is not good indoor or even semi-open full open space, can achieve good heating effect.

RM新时代官网网址

What kind of equipment and terminals do you choose for heating in large-space industrial workshops in winter?