rm新时代平台靠谱吗,新时代平台

Large-space industrial buildings use gas radiation heating to achieve energy saving and carbon reduction

time：2024-04-12
hits：836次
source：正弘奧能

In recent years, in order to promote the development of clean energy in China and reduce pollution, all levels of government have formulated relevant green development policies, vigorously promote clean energy, reduce pollution, but also significantly reduce the operating costs of enterprises, taking into account the improvement of technology and the government's support for the development of clean energy, the overall cost efficiency can be greatly improved.


	 


	<img src="http://hzhonghua.com/Uploads/image/20240412/20240412151429_73363.png" alt="" /> 

 
The gas infrared radiation heating method is to use the combustion of clean energy such as natural gas and liquefied petroleum gas to radiate infrared rays for heating. Infrared rays are not absorbed by the atmosphere, and the heating object is directly radiated, and the heating object absorbs infrared rays and is converted into heat energy, so as to achieve the purpose of heating. According to GB50019-2015 Design Code for heating, Ventilation and air conditioning of industrial buildings 5.5.4: When gas infrared radiation heating is used, the calculated indoor temperature should be 2℃ ~ 3℃ lower than the air temperature in the convective heating room, which reduces the air stratification and convective effect, and the heating system has a higher utilization rate of heat energy. In addition, natural gas, liquefied petroleum gas is clean energy, combustion products reduce nitrogen oxide emissions by 50%, reduce carbon dioxide emissions by 60%, reduce sulfur dioxide and dust emissions by nearly 100%. 
 

	IMPRESIND gas radiant heating system promoted and sold by Beijing Leadway Power&nbsp;Co., Ltd. is an independent heating system, which can be installed on the roof or on the wall. The generator power of radiant heating is between 180 and 270KW, and the maximum length is 120 meters. The unit is an independent gas mounted heating device used in industrial plants, warehouses, hangars and other types of tall space places.


	 


	<img src="http://hzhonghua.com/Uploads/image/20240412/20240412151143_81860.png" alt="" /> 

 
Although the system has the same principle as the prefabricated radiation tube (gas radiation small tube equipment), the lower surface temperature, the special geometry expands the diversity of the configuration, the advanced combustion and flue circulation system, and the very low carbon monoxide and nitrogen oxide emissions make it very different from the latter, which is an energy-efficient and green heating equipment. It is the first choice of heating products for tall space buildings. 
 
The generator of IMPRESIND gas radiation heating system burns natural gas, and the hot fluid generated flows in the radiation tube under the drive of the negative pressure centrifugal fan. The gray and black radiation tube made of aluminum alloy and steel is excited by the high temperature surface to produce far infrared radiation lines, which directly acts on the objects and human bodies in the heating area. After the heat exchange of the hot fluid inside the radiation tube is finished, part of the product will be used for flue gas recirculation through the premix chamber, greatly improving the heating efficiency and making full use of energy. And the other part is directly discharged to the outside. Two heating to achieve the purpose of energy saving, environmental protection, reduce operating costs, comprehensive energy saving up to 30%~50%.

RM新时代官网网址

Large-space industrial buildings use gas radiation heating to achieve energy saving and carbon reduction