RM新时代新项目-百度知道,rm新时代靠谱吗

ECOPAN hot water radiant panel heating energy saving effect is more significant

time：2024-05-15
hits：733次
source：正弘奧能

Our government has developed and implemented a range of clean energy policies and carbon emission targets to address challenges such as climate change and energy security. These policies put forward strict restrictions and regulations on traditional fossil energy use. Therefore, the heating equipment market is also changing to the direction of low-carbon, efficient and environmental protection, and more new energy and new technologies are used to replace or optimize traditional heating methods. 
 
Among them, the heating property of tall space industrial buildings is limited, the hot air is quickly eroded by cold air, so that not only the heating time is longer, the waste of a lot of energy, but also it is difficult to achieve the required heating effect, so from this level of analysis, many tall space factory heating users choose radiation heating. 
 

	Under the same indoor thermal comfort conditions, the air temperature required for radiant heating rooms can be at least 2 to 3 ° C lower than that for radiator heating. If the radiator is used for heating, the room temperature should reach at least 18 ° C; The use of radiation heating, the room temperature as long as 16 ° C can make people feel comfortable), so you can save a lot of heating energy. Compared with the traditional convection heating method, radiant heating can save 30%-50% of operating costs, and the energy saving effect is very significant.


	 


	<img src="http://hzhonghua.com/Uploads/image/20240515/20240515101303_40872.png" alt="" />

 
The ceiling hot water radiation panel is a heating equipment which is installed in the indoor ceiling of a building and heated by means of infrared radiation heat transfer. The ceiling radiation panel is the metal radiation panel combined with the tube plate as the radiation source, and the hot water as the medium, the hot water as the medium has these advantages: high thermal energy efficiency, convenient adjustment, strong heat storage capacity, good thermal stability, long transport distance, and small heat loss. 
 
Description of the hot water radiant panel in the Design Code for Heating, Ventilation and Air Conditioning of Civil Buildings: The ceiling hot water radiation panel is a kind of metal radiation panel, which can be used for comprehensive heating of buildings with a height of 3m~30m and local area or local workplace heating, and its use is very wide, including large shipyards, ships, aircraft and automobile maintenance halls, building materials markets, shopping centers, exhibition venues, multi-functional stadiums and entertainment halls and many other occasions. 
 
By Beijing Leadway Power Co., LTD. Promotion and sales of the ECOPAN hot water radiation panel in the factory is prefabricated into 3 meters, 6 meters (special requirements can be prefabricated 2 meters, 4 meters) standard length. Each radiant panel can be connected with a quick connector. Each radiant panel and collection pipe is prefabricated in the factory and tested for safety. With the same dimensional characteristics (pipe diameter, number and spacing, panel width), ECOPAN hot water radiant panels have higher thermal energy efficiency than other products on the market. The hot water radiation plate adopts modular splicing, series type ribbon arrangement, and the two modules are directly connected by clamping joint, which is quick and easy to connect. This makes it possible to use fewer products to meet the same heating requirements, saving on materials and installation costs.

RM新时代官网网址

ECOPAN hot water radiant panel heating energy saving effect is more significant