新时代RM官方网站下载,RM新时代平台靠谱平台入口-百度知道

Hot water radiant panel to meet the high space heating diversity needs

time：2024-06-03
hits：437次
source：正弘奧能

In recent years, most of the public buildings under construction or already built are tall space buildings. The height of building space is high, and the thermal stratification phenomenon is serious, which has become a widespread physical phenomenon in tall space heating. The height of building space has a great influence on the form and condition of temperature stratification. Practice shows that with the increase of height, temperature stratification becomes more prominent. Tall space heating is to improve the comfort of the human body under the premise of meeting the heating requirements, improve the thermal comfort of the overall building environment in large space, and achieve the purpose of saving energy. 
 
At present, the layout of tall space heating pipeline equipment is difficult. Because of the large heating load in the tall space, it is difficult to arrange the radiator when the radiator is used for heating. When floor heating is used, special treatment should be given to foundation heat insulation, ground heat dissipation and load. When using vertical air supply, horizontal air supply and gas radiant heating, it is also necessary to install pipelines and equipment safely and reliably. In response to these problems, hot water radiant panel heating can meet the various needs of tall space heating. 
 
As a terminal heat dissipation device, the hot water radiation panel does not require electro-mechanical components, consumes no electrical energy, and runs almost maintenance-free, saving operating costs. At the same time, the hot water radiant panel heating system for the water system heating, low temperature and pressure, does not increase the fire rating of the building, can be used in volatile and flammable building environment, will not cause the risk of fire and explosion. 
 
1. Save energy 
Infrared radiation heating, no convection phenomenon, small thermal inertia, no need for long time preheating, heating speed is fast. In tall Spaces, reducing vertical gradient heat loss means saving energy and economic costs. 
 
2. static heating 
No fan operation, no noise, no air disturbance, quiet operation, avoid air convection ash phenomenon. Even in places where the smoke is relatively large, the staff will feel warm and comfortable. 
 
3. No fire risk 
No electrical equipment, no flammable parts, hot water as a heat transfer medium, does not increase the fire rating of the building. It can be used in volatile and flammable built environments without the risk of fire and explosion. 
 
4. Convenient operation and maintenance 

	The system does not require any special maintenance and has no moving mechanical parts. No need to set up a special post to manage and maintain.


	 


	<img src="http://hzhonghua.com/Uploads/image/20240603/20240603162851_30337.png" alt="" /> 

 
By Beijing Leadway Power Co., LTD. Promotion and sales of the ECOPAN hot water radiation panel is made of metal tube plate, in the factory is prefabricated into 3 meters, 6 meters (special requirements can be prefabricated 2 meters, 4 meters) standard length. Each radiant panel can be connected with a quick connector. Each radiant panel and collection pipe is prefabricated in the factory and tested for safety. With the same dimensional characteristics (pipe diameter, number and spacing, panel width), ECOPAN hot water radiant panels have higher thermal energy efficiency than other products on the market. This makes it possible to use fewer products to meet the same heating requirements, saving on materials and installation costs. 
 
ECOPAN hot water radiation panel can be widely used in public, civil, industrial and other tall space heating, can cover theaters, concert halls, halls, stadiums, exhibition halls, industrial workshops, shipbuilding installation, aerospace testing and assembly and many other places.

RM新时代官网网址

Hot water radiant panel to meet the high space heating diversity needs