rm资金盘,新时代RM平台官网

Hot water radiant panel heating and high space industrial energy saving transformation

time：2024-07-17
hits：761次
source：正弘奧能

Description of the hot water radiant panel in the Design Code for Heating, Ventilation and Air Conditioning of Civil Buildings: The ceiling hot water radiation panel is a kind of metal radiation panel, which can be used for comprehensive heating of buildings with a height of 3m~30m and local area or local workplace heating, and its use is very wide, including large shipyards, ships, aircraft and automobile maintenance halls, building materials markets, shopping centers, exhibition venues, multi-functional stadiums and entertainment halls and many other occasions. 
 
Radiative heat transfer directly exchanges heat with the thermal mass of the building. Once the hot water radiant panel temperature is higher than the temperature of the room surface, the building structure will begin to absorb heat. The water content of the hot water radiant panel is lower than that of the traditional radiator system, so the heating uptime is reduced, the preheating time is short, and the thermal effect is fast, thus achieving more efficient intermittent use. The hot water radiant panel will have a downward-radiating component of about 60%, maintaining the soffit temperature and preventing cold water. 
 


	 The hot water radiant panel system has no fire hazard and no combustible components. Radiant heating provides the necessary comfort without air or dust moving around, and responds almost immediately to temperature changes in the room, which can occur due to the switching of the system and the heat load associated with the operation itself in the room. There are many important practical applications in the wood and furniture industry, from sawmills to large processing plants to storage warehouses.


	 



	<img src="http://hzhonghua.com/Uploads/image/20240717/20240717094554_50070.jpg" alt="" />


	<img src="http://hzhonghua.com/Uploads/image/20240717/20240717094612_56135.jpg" alt="" /> 


 
By Beijing Leadway Power Co., LTD. Promotion and sales of the ECOPAN hot water radiation panel, is made of metal tube plate, in the factory is prefabricated into 3 meters, 6 meters (special requirements can be prefabricated 2 meters, 4 meters) standard length. Each radiant panel can be connected with a quick connector. Each radiant panel and collection pipe is prefabricated in the factory and tested for safety. With the same dimensional characteristics (pipe diameter, number and spacing, panel width), ECOPAN hot water radiant panels have higher thermal energy efficiency than other products on the market. This makes it possible to use fewer products to meet the same heating requirements. Itcopan hot water radiation board adopts modular splicing, series type ribbon arrangement, two modules are directly connected by clamping joint, quick connection, simple and convenient. After the pipe connection is complete, insert the decorative cover plate between the radiation plate to cover the connection area and ensure the beauty of the product. 
 
In the future, with the advancement of the industrialization process and the renewal of old equipment and the further elimination of regional boilers, the coverage rate of infrared radiation heating equipment is expected to be further improved. The infrared radiation heating method is suitable for comprehensive heating of buildings with a height of 4m~30m and local area or local working place heating. Whether it is a manufacturing enterprise, storage and logistics center or aircraft, railway maintenance warehouse, infrared radiation heating equipment can be perfectly applied. Therefore, using advanced infrared heating equipment, industrial enterprises not only achieve energy saving and emission reduction, but also create a comfortable working environment for employees and create more considerable economic benefits.

RM新时代官网网址

Hot water radiant panel heating and high space industrial energy saving transformation