RM新时代-RM平台-RM新时代app下载,RM新时代正规平台入口

What product is the best for heating of large space? Itcopan hot water radiant panel is more cost-effective

time：2024-07-18
hits：483次
source：正弘奧能

Under the traditional management mode, most industrial enterprises are still using the traditional convection heating method, the management mode is relatively extensive, not only causing a lot of resources and energy waste, but also bringing a lot of additional carbon dioxide emissions, and the heating effect is not ideal. The cooling equipment heats the air in the surrounding environment, and then uses the specific gravity characteristics of hot and cold air to exchange heat, so as to achieve the purpose of improving the entire ambient temperature. However, the heating effect of this way is affected by the spatial form of the building structure, insulation performance and other parameters, and the heating heat load is relatively unstable. 
 
In some high-end industrial plants, the requirements for heating conditions are high, and the airflow speed caused by heating should not be too large. In the convective heating process, cold and hot air has been circulating, which will affect the comfort of the human body, in contrast, radiation heating basically does not cause air flow, and the heat loss is small, and the building envelope can only absorb heat from the indoor air and dissipate heat to the outdoor through its surface. 
 

	Compared with the convection heating method, the radiation heating is adopted, no convection phenomenon, small thermal inertia, no long time preheating, and fast heating speed. In the environment of radiation heating, the enclosure structure, the ground and the surface of the equipment in the environment have a higher temperature, there is a dual effect of radiation intensity and temperature, resulting in a thermal state that truly meets the requirements of human heat dissipation, so the human body has the best sense of comfort, at this time the human sense of temperature is higher than the air temperature of the surrounding environment.


	 


	<img src="http://hzhonghua.com/Uploads/image/20240718/20240718100711_33305.png" alt="" /> 

 
In the infrared radiation heating products, the hot water radiation panel uses hot water as the heat transfer medium, the radiation panel is arranged in a modular strip, and is installed above the heating space in the form of a ceiling, which effectively solves the problems of poor heating effect and high energy consumption in the convection mode in the tall space. Hot water flows in the radiation panel pipeline, heat transfer to the radiation panel, generate infrared rays, transfer heat to people and objects in tall space buildings, and reduce vertical gradient heat loss. In high-space industrial buildings, this means saving energy and economic costs. 
 

	By Beijing Leadway Power Co., LTD. Promotion and sales of the ECOPAN hot water radiation board, the use of innovative design concept, the pipe as the warmest part of the panel, completely down, and by the metal plate wrapped 70% of its surface (wrapping Angle of more than 280°), increase the heat transfer area, excellent guarantee of heat transfer from the tube to the plate. With the same dimensional characteristics (pipe diameter, number and spacing, panel width), ECOPAN hot water radiant panels have higher thermal energy efficiency than other products on the market.


	 


	<img src="http://hzhonghua.com/Uploads/image/20240718/20240718100723_12957.png" alt="" /> 

 
It can be used for the full heating of buildings with a height of 3m~30m and local area or local workplace heating, and can be used in volatile and flammable building environments, including large shipyards, ships, aircraft and automobile maintenance halls, building materials markets, shopping centers, exhibition venues, multi-functional stadiums and entertainment halls and many other occasions. Do not increase the fire rating of the building, will not cause the risk of fire and explosion.

RM新时代官网网址

What product is the best for heating of large space? Itcopan hot water radiant panel is more cost-effective